← Back to the app

Cutting a cube — what shape is the cross-section?

Slice a cube with a plane through three points and the cross-section can take many shapes. This page shows the nine classic cases, how to construct a section, and how to find the volumes of the pieces, with practice problems. Every figure has an “Open in 3D” button that sets up the same cut in the app.

Nine cross-sections

The black dots are the three points the plane passes through.

Equilateral triangle

Cut through the far ends of the three edges that meet at one vertex. Each side is a face diagonal, so all three sides are equal.

Open in 3D →

Isosceles triangle

Of the three edges at one vertex, pass through the ends of two and the midpoint of the third. Two sides come out equal.

Open in 3D →

Square

A plane parallel to a face gives a square equal to that face.

Open in 3D →

Rectangle

Cut through two opposite parallel edges. The section is 1 by a face diagonal.

Open in 3D →

Rhombus

Cut through two opposite vertices (the ends of a space diagonal) and the midpoint of an edge. All four sides are equal.

Open in 3D →

Parallelogram

Cut through two opposite vertices and a point one third along an edge. Moving the point away from the midpoint turns the rhombus into a parallelogram.

Open in 3D →

Isosceles trapezoid

Cut through the midpoints of two top edges and a bottom vertex. The top and bottom faces are parallel, so the section's top and bottom sides are parallel too.

Open in 3D →

Pentagon

Cut through the midpoints of two top edges and the farthest bottom vertex. The plane crosses five faces, so the section is a pentagon (never a regular one).

Open in 3D →

Regular hexagon

Cut through the midpoints of three edges chosen so that the plane crosses all six faces: it joins six edge midpoints into a regular hexagon.

Open in 3D →

Three rules for drawing a cross-section

  1. Join two points on the same face
    The section's sides lie on the cube's faces. Two points on the same face are joined by a straight line — that is a side of the section.
  2. Parallel faces give parallel sides
    The lines on opposite faces (say top and bottom) are always parallel. Use this to find the missing sides.
  3. Extend lines to find intersections
    If no face has two known points, extend a section line or a cube edge outward and use where they meet.

Worked example — a pentagon by extending lines

Cut cube ABCD-EFGH by the plane through P (midpoint of BC), Q (midpoint of CD) and vertex E. What is the cross-section?

ABCDEFHPQSTXY
The yellow dotted lines are the extensions used for the construction.
Open in 3D →
  1. P and Q are on the top face ABCD, so join them (rule 1).
  2. E shares no face with P or Q. Extend PQ both ways: it meets the extension of AB at X and the extension of AD at Y (rule 3).
  3. X and E both lie on the plane of face ABFE, so join them; XE crosses edge BF at S. Likewise YE crosses edge DH at T.
  4. Join P→Q→T→E→S→P: the cross-section is a pentagon.

Check: PS on face BFGC is parallel to TE on the opposite face AEHD (rule 2). Since BX is half an edge, similar triangles XBS and XAE give BS : AE = XB : XA = 1 : 3, so BS : SF = 1 : 2.

Which shapes are possible?

Cross-sectionPossible?Why / how
Equilateral triangleYesThrough the far ends of the three edges at one vertex
Isosceles triangleYesThrough two points at equal distance from a vertex
Right or obtuse triangleNoA triangular section always has three acute angles
SquareYesParallel to a face
RectangleYesThrough two opposite edges
RhombusYesThrough two opposite vertices and an edge midpoint
ParallelogramYesMove the midpoint of the rhombus cut
TrapezoidYesTwo sides on parallel faces
PentagonYesCrosses five faces
Regular pentagonNoSides on opposite faces are parallel
Hexagon / regular hexagonYesCrosses all six faces; regular when through the center
Heptagon or moreNoA cube has only six faces

Volumes of the pieces

Three ideas cover most volume questions. Take a cube with 6 cm edges (216 cm³).

Cutting off a vertex → a triangular pyramid

If the plane only cuts around one vertex, the piece is a pyramid: right-triangle base × height ÷ 3. Through B, D and E, the piece at A is 6×6÷2×6÷3 = 36 cm³ and the rest is 180 cm³.

Through the center → exactly half

A plane through the center splits the cube into two congruent pieces of 108 cm³ each — e.g. the regular hexagon or the diagonal rectangle.

Cutting all four parallel edges → average height

If the plane crosses the four vertical edges, the lower piece is base area × the average of the four edge lengths. At 2, 3, 4 and 3 cm: 36 × (2+3+4+3) ÷ 4 = 108 cm³. Opposite edges add up to the same (2+4 = 3+3).

Practice problems

Cube ABCD-EFGH has 6 cm edges. Open each problem to see the answer.

Problem 1

ABCDEFGHPQ

Cut through vertex A, P (midpoint of BF) and Q (midpoint of DH). What is the cross-section?

Show answerABCDEFGHPQ

A rhombus
Join A–P and A–Q on their faces. The line from P parallel to AQ on face BFGC passes through G. All four sides are 3√5 cm, but the diagonals AG and PQ differ, so it is a rhombus, not a square.

Open in 3D →

Problem 2

ABCDEFGHR

Cut through vertices A and C and R (midpoint of FG). What is the cross-section?

Show answerABCDEFGHRS

An isosceles trapezoid
Join A–C on the top face. On the bottom face, the line through R parallel to AC passes through S, the midpoint of EF. SR is half of AC and CR = AS, so it is an isosceles trapezoid.

Open in 3D →

Problem 3

ABCDEFGH

Cut through B, D and E. What is the volume of the piece containing A?

Show answerABCDEFGH

36 cm³
The piece is a pyramid on the three edges at A: 6×6÷2×6÷3 = 36 cm³. The section BDE is an equilateral triangle.

Open in 3D →

Problem 4

ABCDEFGHPQR

Cut through the midpoints P of BC, Q of DH and R of EF. What is the cross-section, and the volumes?

Show answerABCDEFGHPQR

A regular hexagon; 108 cm³ each
The plane passes through six edge midpoints, giving a regular hexagon. It goes through the center, so both pieces are 216 ÷ 2 = 108 cm³.

Open in 3D →

FAQ

Is a “section” the same as a “cross-section”?
Yes — both mean the flat face that appears where a plane cuts a solid.
What is the most sides a cube's cross-section can have?
Six. A face can hold at most one side of the section and a cube has six faces, so there is no heptagon or more.
Can the cross-section be a regular pentagon?
No. A pentagon is possible, but sides on opposite faces are parallel, which rules out a regular pentagon.
When is the cross-section a regular hexagon?
When the plane passes through the center perpendicular to a space diagonal — it goes through six edge midpoints.
Can the cross-section be a right triangle?
No. A triangular section around a vertex always has three acute angles.
How do I find the area of a cross-section?
Use the formula for regular triangles and hexagons; split trapezoids and pentagons into triangles. The app shows the exact area with fractions and square roots, so you can check your answer.

Try it yourself

In the app you can click vertices or split edges into equal parts and cut through any three points. The shape's name, side lengths and area are shown automatically.

Open the app

Practice with 26 cross-section problems (answers included) →

Cross sections of prisms and pyramids — parallel, perpendicular, angled →

Cutting cuboids, prisms and pyramids — how to solve cutting problems →

See the 11 nets of a cube →