← Back to the app

How to cut solids — three rules and many shapes

Cutting problems ask what shape appears when a plane slices a solid, and how big the pieces are. They are hard to picture on paper. This page explains the three rules and shows cuts of solids other than the cube — cuboids, prisms and pyramids — in figures and in 3D.

What is a cutting problem?

Cutting problems usually ask two things:

① the shape of the cross-section (how many sides? equilateral? a trapezoid?)

② the volume or surface area of the two pieces

Both start with drawing the cross-section correctly.

Three rules

  1. Join two points on the same face
    Sides of the section always lie on faces of the solid. The line between two points on one face is a side of the section.
  2. Parallel faces give parallel lines
    The section lines on two parallel faces are parallel. In cuboids and prisms this finds the missing sides quickly.
  3. Extend lines when no face has two points
    Extend a section line or an edge outward, find where they meet, then join. The cube page has a step-by-step example.

See a worked construction (cutting a cube) →

Cutting other solids

The black dots are the three points the plane passes through.

Cuboid

In a 1×3×2 cuboid, the plane through the far ends of the three edges at one vertex gives a scalene triangle (√5, √10, √13) — the cut that makes an equilateral triangle in a cube does not here. The corner pyramid is 3×2÷2×1÷3 = 1, one sixth of the cuboid.

Open in 3D →

Triangular prism

Through one top edge and the bottom vertex under the third top vertex, the section is an isosceles triangle. The piece cut off is a pyramid with the prism's base and height, so exactly one third of its volume.

Open in 3D →

Regular tetrahedron

The plane through the midpoints of four edges (parallel to two opposite edges) gives a square — a favorite surprise. The two pieces have equal volume.

Open in 3D →

Square pyramid

Through one base edge and the midpoint of the slant edge on the far side, the section is an isosceles trapezoid whose top is half the base. The pieces are in the ratio 3 : 5.

Open in 3D →

Cutting a stack of small cubes

A classic question: cut a 3×3×3 cube made of 27 unit cubes — how many small cubes are cut? Work layer by layer: draw the section lines at the top and bottom of each layer as seen from above and count the squares between them.

Through three vertices (equilateral triangle)

9 small cubes are cut

Open in 3D →

Through six edge midpoints (regular hexagon)

19 small cubes are cut

Open in 3D →

Layer-by-layer diagrams and practice problems →

Four volume tips

Pyramids: ÷ 3

If the piece is a pyramid, its volume is base × height ÷ 3.

Through the center: half

A plane through the center of a cube or cuboid splits it into two congruent halves.

Slanted cut of a prism: average height

If all side edges are cut, volume = base × the average of the edge lengths.

Big pyramid minus small pyramid

Subtract the small pyramid that sticks out of the extended big one. A 1 : 2 length ratio means a 1 : 8 volume ratio.

See worked volumes for a cube →

Studying with the 3D simulator

  1. Draw the section on paper first, using the three rules
  2. Pick the same three points in the app and rotate the section to check
  3. Where you went wrong, move points along divided edges and watch the shape change
  4. Send the same cut to friends or a teacher with a share link

FAQ

How is the number of sides decided?
By how many faces the plane crosses. A cube has six faces, so its sections have three to six sides.
How do I count the small cubes that are cut?
Layer by layer: draw the section lines at the top and bottom of the layer as seen from above and count the squares between them. A 3×3×3 cube cut through three vertices has 9 cut cubes; the regular hexagon cut has 19.
Can it cut cylinders or cones?
No — the simulator works with solids bounded by flat faces (polyhedra).
Is it free?
Yes, with no sign-up. It runs in the browser on computers, tablets and phones.

Try it yourself

Cut any of 50 solids — cubes, cuboids, prisms, pyramids, Platonic solids — through any three points. The app shows the section's name, side lengths and area, and the volume of the solid after the cut. Set the edge length (say 6 cm) to check answers with the problem's numbers.

Open the app

Practice with 26 cross-section problems (answers included) →

Cutting a cube — nine cross-sections and practice problems →

Counting cut small cubes — layer diagrams and practice →

Cross sections of prisms and pyramids — parallel, perpendicular, angled →

The 11 nets of a cube →